Faculty of Engineering Needs

DEPARTMENTS IN FACULTY OF ENGINEERING

For effective teaching and research activities in the Departments, the following are needed.

DEPARTMENT OF CHEMICAL ENGINEERING.

  • Gas Chromatograph/Mass Spectrophotometer (GCMS)
  • Gas Chromatograph with Flame Ionization Detector
  • Gas Chromatograph with TCD
  • Micro-organisms Counter
  • Hydraulic Orifice Flow Equipment
  • Fluid Orifice Flow Equipment

DEPARTMENT OF PETROLEUM ENGINEERING.

  • Rheometer, Viscometer
  • Sand Content Kit
  • Liquid Permeameter
  • Porosimeter
  • Planimeter
  • Hydrogen Content Equipment
  • PVT Console
  • Gas Permeater

DEPARTMENT OF CIVIL AND ENVIRONMENTAL ENGINEERING LIST OF REQUIRED EQUIPMENT


CONCRETE AND STRUCTURE LABORATORY.

  • Pundit Machine For in-situ Concrete Test
  • Steel Tensile Testing Machine –1000KN
  • Computerised Compression M/C –1500KN
  • Soundness Apparatus for Cement
  • Fineness Apparatus for Cement
  • Cement Analyser Apparatus

  • PUBLIC HEALTH LABORATORY.

  • UV Visible Spectrophotometer with accessories
  • Water distillation apparatus
  • Bench top pH meter
  • TDS/Conductivity Salinity meter
  • Autoclave (for microbial analysis)
  • COD distillation/reflux apparatus
  • COD digester (with reagent box)

  • BOD incubator
  • Analytical weighing balance
  • Turbidity meter
  • Particulate meter
  • Gas pollution meter –CO2, methane, SO2, nitrogen,
  • Oil immersion microscope (for microbial analysis)
  • AAS (Atomic Absorption Spectrophotometer

SOIL MECHANICS LABORATORY

  • Automatic Compaction with Accessory and Mould
  • TriaxialTest for Effective Stress Measurement Apparatus
  • Automatic CBR/Proctor Compactor and software
  • Complete Consolidation Test Machine
  • Universal Extruding Machine (Horizont

DEPARTMENT OF ELECTRICAL/ELECTRONICS AND COMPUTER ENGINEERING

ELECTRONICS LABORATORY

  • Keysight33210/20A Arbitrary Waveform Generator
  • KeysightE3631A Power supply
  • DreamCatcherME3000 Analog Electronics Courseware
  • Matlab(Multi users)
  • Multisim software (Multi users)

  • TELECOMMUNICATION LABORATORY

  • N9310A RF Signal Generator
  • E5061B Network Analyser
  • N9913A Microwave Analyser
  • ME 1100 Digital RF Comm
  • Advanced Design System
  • 16201A 7 mm Terminal Adapter Kit

  • COMPUTER HARDWARE LAB TO STANDARD

  • MTS-518051 MICROCOMPUTER TRAINER
  • Accurate CNCPCB prototyping machine.ModelA637.Accessories includes:-Video camera,Vacuum table,Vacuum generator,Acoustic cabinet,Debris collecting system,Silent aircompressor,Ring setting and removal tools.
  • Printer Trainer
  • Fuzzy Logic Trainer
  • Digital Regulated Power Supply
  • ATRAN'sATLAS550s for WAN Emulation
  • Local Area Network Trainer(ModelXPO-LAN)
  • Trainer Boards to Study MotherBoard swith different chipsets and processors.
  • Network Printer
  • SybaSY-ACC65053 100 piece Computer Technician Toolkit for Repairing, Wiring and Cleaning
  • Electric Dust blower
  • Core i5 computer system, 16GB RAM, 1TB HDD Win 8 Pro.

  • SOFTWARE

  • Labview Computer controlled electronics lab with virtual instrumentation suites.
  • Labview Computer Based Graphical Programming for customizing instrumentation, data acquisition, and control with PC based hardware to interface circuits and other external hardware
  • Labview Computer Based Spectrum Analyzers, Multimeters, Oscilloscopes, Signal Generators, Digital I/O, Analog I/O, Waveform Analysis, etc.
  • Fluke Network Inspector (NIS -250)

  • MACHINE LAB

  • D.C Shunt Motor and Shunt Generator set
  • Resistive Loading Bank with or without Sliding contact
  • Inductive Loading Bank
  • Capacitive Loading Bank

  • Single phase Induction motor
  • Three phase induction motor
  • Single phase Variac
  • Three phase Variac
  • Clamp-On-Ammeter/voltmeter
  • Single phase Forster Transformer
  • Current Transformer
  • Mechanical Analogue Tachometer
  • Power Factor measuring Meter
  • Multimeters
  • Potential Transformers
  • Digital Multimeterwith frequency test
  • Complete Electrical Tool box
  • Frequency Meter
  • Three phase Sequence Tester
  • Three phase slip-ring Induction motor and D.C
  • Three synchronous Generator with D.C motor Driven
  • 7HP D.C Motor, with 3phase 5Kva Alternator

  • CONTROL LABORATORY

  • Complete DC Modular Servo Assembly Equipment with manuals and all the accessories
  • Servo Systems Fundamental Trainers(Feedback or equal)
  • Mobile Robot Unit and Platform with software,high end PC interface control board on-board processing
  • Set of Educational Servo motor and Process Control unit with pc interface boards
  • Analogue and Digital(LCD)Multi-purpose Meters
  • 20-100MHz Digital Dual Channel Oscilloscopes
  • Mechatronics Equipment
  • 0-30V D.C Variable Power Supply Units
  • Electronic Precision Tool Box

  • HIGH VOLTAGE LABORATORY

  • High Voltage Control Desk for AC/DC Impulse Measurement with Triggering unit and Oscilloscope.
  • Circutor Energy/Power Analyzer Model AR
  • High Impulse Voltage Measurement Construction Kits
  • Dr. Strauss Impulse Measurement Equipment
  • Omicron MPD700 with all accessories; 200KV/200pF Coupling Capacitor and 15KVA,100KV Testing Transformer.
  • FLIR ThermoVision Camera P-Series
  • Megger Earth Resistance Tester
  • Power System Simulation Equipment
  • Megger Overhead Line Testing Equipment with Teleflex Reflector, Meter and Surge Wave Generator
  • Megger Monitoring and Fault Location in Low Voltage Switch

DEPARTMENT OF MECHANICAL ENGINEERING LIST OF REQUIRED EQUIPMENT

  • Refrigeration Laboratory Unit Apparatus R.F.01 by Soliteq
  • Centrifugal force Apparatus (TM1005)
  • Accessory: VDAS Bench-Mounted Vesicant (DAS-B)
  • Hydraulic Copying Milling Machine
  • Thin Cylinder Apparatus SM 1007 with auxiliaries
  • Metal Machine Flat Surfaces Grinding Stain
  • Engine speed control apparatus (CE107)
  • Accessory: I controller (CE120)
  • Universal Testing Machine (SM100b)
  • Accessory: I Hand –Operated Pump (8m 100b)
  • Stroboscope (STI)
  • Modular Airflow bench and
  • Accessories (AF10-Af10-Af18)
  • Flight Demonstration Wind tunnel (AF41)
  • Control & Instrumentation Study Station (TE37)
  • Gravimetric Hydraulic Bench (HID)
  • Flow Meter Calibration (H40)
  • Reynolds Number and Transitional Flow (H215)
  • Centrifugal Pump Test Set (H47)
  • Digital Extensometer (Sm100d)
  • Metal Grinding Dies
  • Strain Gauge Trainer (SM009)

  • Torsion Testing Machine –30NM (SM1001) –Bench Mounted Machine
  • Creep Machine (SM1006)
  • Journal Bearing Demonstration (TM25)
  • Static and Dynamic Balancing (TM102)
  • Gyroscope (TM104)
  • Cam Analysis Machine (TM21)
  • Natural Convention and Radiation (TE85)
  • Cross-Flow Heat Exchanges (TE93)
  • Steam Motor and Energy Conversion Test Set (TD 10500)
  • Small Engine Test Set (TD 200)
  • Engine Cycle Analyzer(ECA 100)
  • Two-Shaft Gas Turbine
  • Two-Stage Compressor Test Set (GT 103)
  • CNC Lathe Machine
  • CNC Milling Machine
  • BrinellHardness Tester Machine
  • Hounsfield Tensometerwith VDAS
  • Hydraulic Pressing Machine
  • Digital Electronics Impact tester for Izod& Charpycombination in kilojoules units. (10kj capacity)

DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING LIST OF REQUIRED EQUIPMENT

  • Camera enabled optical microscope (OM X 50 X 1000) withfull complement of image analysis software (Upright or inverted)
  • Mounting Machine (Manual)
  • Salt Bath Furnaces
  • SM1090 fatigue Testing Machine
  • Reference 600TM for Potentiostat/Galvanostat ZRA with complete
  • spectrum of accessories of Electrochemical Impedance Spectroscopy (EIS)
  • Hydroflex Standard Hydrogen Electrode (SHE)
  • Thermal Conductivity Analyser
  • JSM-6610 Scanning Electron Microscope with EDS (JEOL-Japan)
  • Oven, Digital Display with fan, 101-1-AB, Tempt 350°capacity 71L
  • Electric Heat Treatment Furnace with operating temperature of 1,800oC

DEPARTMENT OF SYSTEMS ENGINEERINGLIST OF REQUIRED EQUIPMENT

    ROBOTICS LAB

  • Mover66DOFRobotArm
  • LynxmotionAL5DPLTWRoboticArmKit
  • LynxmotionHQuad500Drone(BaseComboKit+QuadrinoNanoController)
  • DigitalOscilloscope
  • ervoErectorSet(S.E.S.)V1.1
  • ArduinoKit(Unobased)
  • BIOMETRIC LABORATORY

     CONTROL ROOM EQUIPMENT
  • Transducer
  • Sound card digit design
  • A mixer (sound craft, Mackie or Yamaha)
  • Studio monitor
  • Audio link
  • Headphone Amplifier
  • Pro-tools 11 software
  • Audiotechnica 4033
  • (2) Desktop PC Dell AlienwareAurora Core i7-16GB -2TB HDD

    AUDIO VISUAL UNIT

  • Sony HD Digital Camera
  • Sony HD Digital Recorder
  • FingerveinScanner
  • Handwriting signature scanners
  • Fingerprint scanners
  • .Irisscanner
  • LED Screen
  • Wearable sensors for data capture & disks
  • COMPUTATIONAL LAB

  • 3D Printer
  • 3 Desktop PC Dell AlienwareAurora Core i7-16GB -2TB HDD
  • Educational license for the following software
  • 1. AnsysFluent
    2. ComsolMultiphysics
    3. Mathematica
    4. MATLAB 2017a

    DEPARTMENTAL E-LIBRARY

DEPARTMENT OF BIOMEDICAL ENGINEERING LIST OF REQUIRED EQUIPMENT

  • 12-Lead ECG Placement Trainer
  • Electrical safety AnalyzerLKG 610
  • Tektronix 60MHZ Digital Oscilloscope
  • Trans-cranial Magnetic Stimulator
  • Patient ECG Simulators
  • EEG Simulator
  • Teaching aids with SMART class equipment for mechatronics /instrumentation Lab
  • 3D Printer
  • 24MHz Dual Channel Digital Function Generators
  • Scanning Electron Microscope Hitachi s-530